CERA DECO PLUS is a modified acrylic premium emulsion based wall coating system having excellent film properties. It is a weather proof and algae-resistant, high-build, water-based, 100% acrylic, aesthetically pleasing decorative waterproof coating. Uniquely designed for superior spread-ability (brush-ability) which in turn supports applicator in improving better productivity. Advantages:
Crack bridging properties
Excellent exterior durability
Improved aesthetics and hygienic
Excellent anti-algal and anti-fungal property
Smooth emulsion imparting good workability
Excellent wash ability hence very low maintenance
CERADECO PLUS is a premium acrylic polymer and micro-porous protective and decorative coating which gets absorbed into the surface pores of concrete as well as produces a hydrophobic barrier on the surface of structure which is highly impermeable to water and water vapor.
Resistance to saponification action imparting forever spotless walls
Brighter, cleaner, uniformly textured, un faded shades with sheen finish.
Excellent DPUR and penetration to chalky and powdery surface Ease of application
CERA DECO PLUS has excellent built in property of flexibility and thus it accommodates expansion and contraction of concrete during season variations.
CERA DECO PLUS has excellent water resistant property. It has exceptional adhesion to the substrates
CERA DECO PLUS allows the concrete surface to breath.
Method Of Use:
All the surfaces where CERA DECO PLUS is to be applied should be dry and free from contamination such as oil, grease, laitance, algae etc. Remnants of mould release agent or curing compound have to be removed, where present. Trials may be needed if CERA
DECO PLUS is to be coated over an already coated surface.
To have a continuous base, the unevenness in concrete surface may have to be filled, so that the CERA DECO PLUS coating is unbroken. Filling of blowholes or pitted areas should be carried out and cured for 48-72 hours prior to application of acrylic based single component CERA DECO PLUS.
Application can be done with a brush or roller. Avoid application during rainy weather. In hot and dry weather, slightly wet unpainted surfaces with water to prevent CERA DECO PLUS from drying out rapidly.
Mask glass surfaces, joint sealants and bitumen coated areasbefore application. The material should be stirred thoroughlybefore use and the coating should be done so as to achieve a wet film thickness of about 100 microns per coat.
CERA DECO PLUS should be applied for minimum of 2 coats on the surface. The 2nd coat may be applied after 4 hours of 1st coat. At 300C, CERA DECO PLUS is tack-free after 1 hour. The total dry film thickness of both coats put together should be around 180- 200 microns.
Brushes/Rollers/Spray and guns should be cleaned immediately after use.
CERA DECO PLUS will have coverage of 6m2 /Kg per coat for a DFT of 80-100 microns.
The coverage may vary depending on the surface texture, the method of application and wastage.
If stored in dry, unopened containers, the shelf life is 12months. Shelf life reduces with increase in temperature and humidity.
CERA DECO PLUS is non-toxic so all splashes on skin and eyes can be washed away using water.