Cera- Chem Private Limited

CERA SCREED EP is a three component epoxy systemspecially formulated to provide chemical and abrasionresistant topping for industrial floors, corrosion resistantlining in chemical industries, for foundation protection, runways, roads, etc.,.

ADVANTAGES

■ Easy to use
■ Excellent chemical resistance
■ Impact and abrasion resistant
■ Nonslip - vehicular & pedestrian traffic
■ High flexural, compressive and tensile strengths

USAGE

■ Ideally suitable as a floor topping material for industrialplant and processing areas, petrochemical industries, battery rooms, breweries, food processing and pharmaceutical industries, workshops, pathways, ramps, driveways, painting shops, etc.,
■ Recommended for structural repairs and rehabilitation of corrosion affected structures, dilapidated RCC structures, honey-combed zones of structural elements and in areas where impact resistance and chemical resistance are required
■ Can be used for repair and rehabilitation of runways,roads, etc.,.

PACKING
13.6 Kg Units.

SHELF LIFE
12 months from the date of manufacturing, if stored in a sealed original container.

CERA INFRAGUARD - S is a high-grade aromatic solvent type single component protective and decorative

coating to ensure lasting durability for exposed surfaces ofconcrete and masonry structures.

ADVANTAGES

■ Resistant to algae growth

■ Available in a range of colours

■ Allows the substrate to breathe

■ Resistant to Ultra-Violet radiations

■ Durability assured in all climatic conditions

■ Single component system assists in easier application

■ Excellent resistance to carbon dioxide, chloride and

sulphates - ideal for coastal areas

USAGES ■ Can be used for the protection of old or new concrete/masonry structures ■ Can be applied on bridges, flyovers, buildings structures close to coastal areas, and industries where protection is needed from carbon, chloride, sulphate, and other salt attacks

PACKING

1, 6 & 25 kg containers.

SHELF LIFE

If stored in dry, unopened containers, the shelf life is 12

months. Shelf life reduces with increase in temperature and

humidity.

CERA CORROGUARD EP is high build, solvent free, epoxy coating for protecting steel and concrete structures exposed to severe corrosive conditions. 

ADVANTAGES
■ Easy to apply
■ Available in different colors
■ Hygienic and can be easily cleaned
■ Excellent adhesion to most surfaces
■ Excellent resistance to grease, oil, and water
■ Excellent abrasion resistance and long lasting
■ Excellent protection against chemical and acid environments

USAGE:
■ Can be used as a protective coating for steel and RCC structural elements, piers, foundations, etc.,
against saline, corrosive, or chemical and acidic environments. CERA CORROGUARD EP also protects
the concrete against carbonation and chloride attack.

PACKING:
1 & 6 Kg.

SHELF LIFE:
12 months from the date of manufacturing, if stored insealed original packing and in a cool, covered place.

CERA COOLENT PLUS is a specially formulated solar radiant single component acrylic copolymer based surface coating made out of white microscopic hollow ceramic spheres which works by reflecting, refracting and dissipating radiant heat and thus reducing heat transfer through building roofs, walls and ceilings.

ADVANTAGES

■ Easy to use system 
■ UV stable & excellent heat resistance
■ Acts as a natural barrier to heat transfer
■ Provides high solar thermal reflectance and thermal emissivity
■ Can be used as roof coating and thermal insulation slip resistant coating
■ Helps to achieve phenomenal quantity of energy and money savings

USAGE
■ Being a single component its a very easy-to-use system
■ Application helps to achieve exceptional quantity of energy savings i.e. electricity bill savings in excess of 20%
■ Has good heat insulation properties for making homes,warehouses, factories, metal roof, etc., more comfortable in summer
■ Can be coated on concrete roofs, asbestos sheets, GI corrugated sheets, clay tiles, bricks or any other kind of building materials to reduce the intensity of heat inside the building.
■ Not only used as roof coating but also as thermal insula-tion slip resistant coating

PACKING

■ 3, 6 & 20 Litres.

SHELF LIFE

■12 months in sealed cans if stored in dry conditions.

CERA HARDFLOOR is a ready to use composition consisting of polymer modified binders andgraded quartz aggregates, formulated for dry shake application and trowel embedment onfresh concrete surfaces requiring high degree of abrasion resistance.

Advantages:

■ Ready to use■ High performance surface hardener■ Ensures durable hard wearing surface■ Resistant to oil and grease penetration■ Bonds monolithically with base concrete■ Can handle heavy duty traffic without wearing, spalling, and dusting■ Provides highly abrasion resistant surface to concrete floors

USAGES■ Treated surface is capable of handlingheavy-duty traffic and is resistant to wearing,dusting, spalling, and deterioration■ Designed to effectively reinforce indoor andoutdoor concrete floors for light, medium, heavy,and ultra- heavy duty industries and other areasrequiring durable and abrasion resistant concretefloors■ Can be used at the time of floor construction orwhen re-topped with at least 25 mm properlybonded new concrete■ Adds to the hardness and greatly extends thelife of any good concrete floors or pavements. Theuse of CERA HARDFLOOR compensates for normalconcrete aggregate segregation and surfaceweakening. However, it will not substitute for poorfloor design or construction■ Recommended for use in indoor and outdoorfloors and pavements in public and industrialplaces, warehouses, production areas, loadingbays, shopping centres, schools and institutions,commercial complexes, garages, showrooms,laundries, parking lots, plazas, recreation areas,railway workshops, and platforms, etc.,

PACKING25 & 40 kg polythene lined bags.

SHELF LIFECERA HARDFLOOR will retain its properties for 12 months when kept in the original packing.

CERA Infragaurd WA Anti Carbonation Coating is an aqueous based high build acrylic polymer and micro-porous protective and decorative coating containing specifically blended mineral fillers to ensure lasting durability for exposed surfaces of concrete and masonry structures from carbonation attack.

ADVANTAGES■ Excellent water repellence■ Available in a range of colours■ Allows the substrate to breathe■ Resistant to Ultra-Violet radiations■ Anti-fungal and resistant to algae growth■ Single component system assists in easier application■ Excellent resistance to atmospheric carbongases and acid gases■ Excellent bond, flexibility & good crack bridgingproperties■ Excellent resistance to chloride and sulphates ideal for coastal areas Interior/Exterior coatingapplication
USAGES
■ Highly recommended for bridge coating, industrial & coastal structures■ Can be applied on culverts, and structures in the STP area■ Can be applied to residential & commercial building near coastal areas■ Power plants, food industries, fertilizer plants, etc.,■ Can be applied automobile industry, steel plants & chemical storage buildings

PACKING1, 6 & 25 kg containers.

SHELF LIFEIf stored in dry, unopened containers, the shelf lifeis 12 months. Shelf life reduces with an increase intemperature and humidity.

CERA AQUASIL is a clear, water dispersible, orga-nosilane nano-based reactive waterproofingsealer which prevents the capillary actions of water and makes the concrete durable.

ADVANTAGES
■ Does not leach
■ Water repellent property
■ Resistance to acids/chemicals
■ Stops capillary rising dampness
■ Resistance to chloride migration
■ No peel-off like other waterproofing membranes
■ Clear, concentrated formula can be diluted withwater
■ Easy to apply as it is sprayed (Also can bebrushed or ponded)
■ Renders most cementitious surfaces waterrepellent for more than 20 years
■ Easy to apply on horizontal or vertical surfaceswith a brush, roller or low-pressure sprayer
■ Protects surfaces from structural and aestheticdamage such as efflorescence, UV degradation,ASR, and chloride intrusion and restricts thegrowth of mold and mildew

USAGES
■ Can be effectively used as a waterproof coatingfor concrete and masonry surfaces for promotingwater repellent properties
■ Can be used as a penetrating sealant for differ-ent substrates like concrete, brick, stone, stucco,tile, mortar, grout, plaster, sand and soil
■ Can be used on areas such as RCC slabs, terrac-es, balconies, basements, sunken, toilets, retainingwalls, podiums, masonry walls, water bodies andtanks

PACKING11, 10 & 20 kg containers.
Bulk packing is also available on request.

SHELF LIFEIf stored in dry, unopened containers, the shelf lifeis 12 months. Shelf life reduces with an increase intemperature and humidity.

CERA Self Level EP  Epoxy Topping System is a self-leveling flooring system that canbe applied in thicknesses varying from 600 microns up to 3 mm, which forms a dense impervious aesthetically pleasing floor for industrial applications.

Advantages:

• Abrasion Resistant and durable
• Resistant most chemicals
• Hygienic – provides joint free flooring
• Aesthetically pleasing colors
• Easy to apply system

Function:

• Cera self level EP when hardened by the reaction of Epoxy resins and hardener becomes very hard and has high resistance to abrasion. The hardened system is extremely chemical resistant as well as exhibits high flexural and tensile strengths.

Uses:

• Cera Self Level EP is suitable for all types of cement based floors in industries as well as plasters, asbestos cement, Iron and steel.
• Cera Self Level EP is ideal for use in clean rooms, laboratories, electronic industries, food processing industries, plant rooms etc.
• Cera Self Level EP is an excellent topping system for the floors of power stations, offices and public buildings, garages, assembly units etc.

Method Of Application:

• Surface preparation:
• Cera Self Level EP shall be applied only on sound surface free of dust, oil, grease, cement contaminants etc which can adversely affect uniform adhesion.

Priming:

• To ensure positive bond between the concrete surface and Cera
• Self Level EP it is necessary to prime the surface using Cera
• Primer EP.
• Mix proportion of Cera Primer EP
• Part A: Part B = 2:1

Mixing And Application:

• Mix thoroughly the components of Cera Self Level EP in a plastic bucket and pour on to the surface. Assist the leveling by means of spatula or squeeze to the required coating thickness. Cera
• Self Level EP can be applied for thicknesses varying from 600 microns to 3mm. A spiked roller shall be used to remove excess air and to assist leveling of the material.

Coverage:

• 17 Kg unit of Cera Self Level EP will cover 7.5 m2 for 1 mm thickness.
• Cera Primer EP will cover 6 – 7 Sqm/ Kg /coat

Shelf Life:

• Cera Self Level EP can be stored for 6months in sealed packs.

Health & Safety:

• Avoid contact with skin for prolonged period. Any contact with eye, wash immediately with plenty of water and seek medical attention.

CERA ACRYL is a high grade, solvent type, singlecomponent, methacrylate based, dust free,protective coating for concrete and stuccoagainst environmental pollution.