Cera- Chem Private Limited

CERA FLEX is a multidimensional microscopic fibre enriched acrylic polymer based highly flexible coating suitable as a waterproofing and protective system for concrete and other structures.

ADVANTAGES

■ Excellent thermal insulation■ Resistant to ultra violet radiation■ Weatherproof protective coating■ Anti-carbonation and chemical resistant coating■ Easy to use, single component and bio-friendly material■ High elasticity and tensile strength of the cured membrane enables it to accommodate roof movement■ Can be used on a variety of substrates such as concrete, asbestos, cement, zinc and GI sheets, timber, light weight concrete

USAGE

■ Can be used for roof slabs, terraces, balconies, sunshades,parapet walls, etc.,
■ Ideally suited for application on structures having complicated geometry like domes, arches, shells, folded plates, paraboloids, and corrugated sheets■ Suitable for horizontal and vertical surfaces■ Can be used for waterproofing of new structures as well as old surfaces

PACKING

■1, 6 & 25 Kg.

SHELF LIFE

■ 12 months from the date of manufacturing. If stored insealed original packing.

CERAPOXY- 63 PRO ECO is a specially modified water based, two component epoxy resin based tile joint grout supplied in preweighed measures suitable for grouting tile joints in commercial, residential and industrial areas, especially on exposed exterior areas.

ADVANTAGES■ Highly UV resistant.■ Various colors and easy to apply.■ Resistant to a wide range of chemicals.■ Excellent washability post application.■ Hygienic & anti-bacterial food grade epoxy.

FUNCTIONSCERAPOXY PRO ECO when mixed and applied as a tile grouting material will form a chemical resistant and hygienic joint of exceptional properties like antibacterial, acid, alkaline and high abrasion resistance. It is also called Germ Proof Grout. Being a water based epoxy tile grout, it has an edge over other epoxy grouts. It can be applied even in the presence of moisture which is very critical in epoxy application. Because of its high UV stability, it can also be used in exposed areas. It is supplied in a variety of colors and the aesthetics of the tiled area will improve dramatically.

USAGES■ Highly useful for grouting all types of ceramic and vitrified tiles.■ Recommended for use in pharmaceutical industries, hospitals, kitchens, bathrooms, and toilets where the hygienic surface is mandatory.■ Can be used for grouting acid resistant tiles, marble, granite, kota stones, etc.,■ Ideal for use in industries where chemical resistant grout is required.■ Good for using areas exposed to sunlight.

CERAPOXY- 63 PRO ECO is a specially modified water based, two component epoxy resin based tile joint grout supplied in preweighed measures suitable for grouting tile joints in commercial, residential and industrial areas, especially on exposed exterior areas.

ADVANTAGES■ Highly UV resistant.■ Various colors and easy to apply.■ Resistant to a wide range of chemicals.■ Excellent washability post application.■ Hygienic & anti-bacterial food grade epoxy.

FUNCTIONSCERAPOXY PRO ECO when mixed and applied as a tile grouting material will form a chemical resistant and hygienic joint of exceptional properties like antibacterial, acid, alkaline and high abrasion resistance. It is also called Germ Proof Grout. Being a water based epoxy tile grout, it has an edge over other epoxy grouts. It can be applied even in the presence of moisture which is very critical in epoxy application. Because of its high UV stability, it can also be used in exposed areas. It is supplied in a variety of colors and the aesthetics of the tiled area will improve dramatically.

USAGES■ Highly useful for grouting all types of ceramic and vitrified tiles.■ Recommended for use in pharmaceutical industries, hospitals, kitchens, bathrooms, and toilets where the hygienic surface is mandatory.■ Can be used for grouting acid resistant tiles, marble, granite, kota stones, etc.,■ Ideal for use in industries where chemical resistant grout is required.■ Good for using areas exposed to sunlight.

CERA BOND 28 Tile Adhesive is the ideal bonding material for fixing vitrified and ceramic floor and wall tiles, as well as marble, stone claddings of small and medium size applications. It possesses many advantages over the conventional cement sand mortar.

Advantages:

• High bond strength. Ensures permanent installation.
• Good open wet time for better workability.
• No soaking of tiles in water is required.
• No further watering is required for curing.
• After curing it is waterproof and will not permit seepage of water.
• It has built-in flexibility and prevents crazing and shedding of tiles.
• Great savings in Men, Materials and Time.

Uses:

• Cerabond 28 can be used on cementitious screed and on cementitious self leveling floors.
• Cerabond 28 is highly effective on tile on tile applications.
• Cerabond 28 can be used on vertical surfaces mainly due to its excellent tile fixing mortar properties.
• Cerabond 28 is ideally suitable for porous and non-porous old tiles on walls.
• Cerabond 28 is a suitable material for both interior and exterior surfaces.

Method Of Application:

• Surface Preparation: All laitance, oil, grease etc, shall be cleaned by grinding, wire brushing, chipping, sand blasting, high pressure water jet or chemical etching. Any uneven surfaces shall be finished level using Cera Latex SBR modified mortar.
• Mixing and application: The water: tile fixing mortar ratio is 1:3. The mixing shall be done gradually by hand trowel or with a slow speed mixer to make a smooth, uniform consistent mix. Ensure while mixing mechanically control the water ratio. After mixing, allow the mixture to stand for 5 minutes for it to mature. Do not add excess water. Remix the paste before applying. Apply the mixture over the surface using the straight edge of the notched trowel and comb the applied tile fixing mortar using the notched side of the trowel to achieve a uniform thickness.
• Knotch trowel of 6 - 10 mm can be used as per the tile requirement. Proper care should be taken to ensure coverage of the tile surface for suitable adhesion. The tile or stone shall then be pressed into the tile fixing mortar for fixing. Rubber hammer or wooden roller shall be used for tapping all four corners of the tile and centered which will enable the entrapped air to be released and spread the tile fixing mortar evenly. It also helps better binding between the tile and the substrate

Shelf Life:

• 12 months in sealed & stored in dry condition.

Health & Safety:

• Avoid contact with skin for prolonged period. In case of any contact with eyes, wash immediately with plenty of water and seek medical attention.

CERA FLEX is a multidimensional microscopic fibre enriched acrylic polymer based highly flexible coating suitable as a waterproofing and protective system for concrete and other structures.

ADVANTAGES

■ Excellent thermal insulation■ Resistant to ultra violet radiation■ Weatherproof protective coating■ Anti-carbonation and chemical resistant coating■ Easy to use, single component and bio-friendly material■ High elasticity and tensile strength of the cured membrane enables it to accommodate roof movement■ Can be used on a variety of substrates such as concrete, asbestos, cement, zinc and GI sheets, timber, light weight concrete

USAGE

■ Can be used for roof slabs, terraces, balconies, sunshades,parapet walls, etc.,
■ Ideally suited for application on structures having complicated geometry like domes, arches, shells, folded plates, paraboloids, and corrugated sheets■ Suitable for horizontal and vertical surfaces■ Can be used for waterproofing of new structures as well as old surfaces

PACKING

■1, 6 & 25 Kg.

SHELF LIFE

■ 12 months from the date of manufacturing. If stored insealed original packing.

CERAPOXY 63 is a three-component epoxy resin based tile joint grout supplied in preweighed measures suitable for grouting tile joints in commercial, residential and industrial areas.

ADVANTAGES
■ Suitable for use in wet areas.
■ Various colours and easy to apply.
■ Resistant to a wide range of chemicals.
■ Excellent washability post application.
■ Good resistance to abrasion and stain-free.
■ Hygienic and anti-bacterial as it is a food grade epoxy.

FUNCTIONSCERAPOXY 63, when mixed & applied as a tile grouting material will form a chemical resistant and hygienic joint of exceptional properties likeantibacterial, acid, alkaline & high abrasion resistance. It is also called Germ Proof Grout. Being supplied in variety of colours the aesthetics of the tiled area will improve dramatically.

USAGES
■ Highly useful for grouting all types of ceramic and vitrified tiles.
■ Ideal for use in industries where chemical resistant grout is required.
■ Can be used for grouting acid resistant tiles, marble, granite, kota stones, etc.,

CERA EFF PRIMER is a water based, VOC freeprotector formulated to impart anti efflorescenceproperties and to stop moisture & colour absorption.To be applied on the rear & four sides of thetile and natural stones that are highly absorbentmaterials.

CERA CRYSTALLINE INTEGRAL is a crystalline capillaryadmixture system consisting of a selectedblend of Portland cement, special quartz andproprietary chemicals. The active chemicals inCERA CRYSTALLINE INTEGRAL react with theby-products of cement hydration in wet concreteand causing a catalytic reaction and generatingnon-soluble crystals which fill and bind the poresand capillaries in the concrete.