Concrete Admixture	Chemical Grout	Tile Adhesives
Epoxy Coating	Concrete Repair Mortar	Protective Coating
Concrete Surface Treatment	Wall Putty	Waterproofing Admixture
CERA SEAL Expansion Joint Sealant	CERA Self Level EP Epoxy Topping System	CERA Floor Hardner
CERA CRYSTALLINE Integral Elastomeric Acrylic Memb	CERA ZINC ZR Reinforcement Coating	CERA Fil 45 Tile Joint Grout
CERA Rust Remover	CERA Infragaurd WA Anti Carbonation Coating

Home»Our Products»

Wall Putty

Offering you a complete choice of products which include 50 kg cera wall putty and 20 kg cera wall putty.

50 Kg CERA Wall Putty

REQUEST CALLBACK

Click to Zoom

Ask Latest Price

Product Price: Get Latest Price

Product Brochure

Product Details:

Brand	CERA
Raw Material	Acrylic
Categories	Wall-Paper Coating, Wall Coating, Building Coating
Usage/Application	Interior
Packaging Type	HDPE
Packaging Size	50 Kg
Can be applied in	1 to 2 mm Thickness Per Coat

50 Kg CERA Wall Putty is cement based, ready to use, seamless plaster supplied in white and light grey powder form requiring addition of water at site before use. It replaces conventional materials like Plaster of Paris, lime, etc because of its superior properties.

Advantages:

Suitable for new and old surfaces.
Good bond strength.
Water resistant
Can be applied directly over concrete and cement plaster.
Fills fine hair line cracks and pin holes.

Function:

Cera Wall Putty when mixed in the pre-weighed proportion forms a thixotropic paste which when applied on cementitious substrates produces a strongly adhering levellling medium suitable for taking all types of decorative paints and wall finishes.

Uses:

Cera Wall Putty can be used on new plastered surfaces for preparing the surface for painting.
Cera Wall Putty can be used in renovation of old buildings due to the property of strong adhesion with existing surfaces.
Cera Wall Putty can be directly applied on fair faced brick masonry, hollow blocks and concrete walls for preparing the surface for painting.
Cera Wall Putty can also be used under the ceiling.

Method Of Application:

Surface Preparation:
It is important to prepare the surface by removing all loose and deleterious matters, oil and grease etc., before treating with Cera Wall Putty. The surface should be sufficiently damp before the putty is applied.

Mixing & Application:

Cera Wall Putty shall be mixed in a clean basin adding 37 – 40% clean water by weight. The mix shall be thoroughly mixed to get a homogenous consistent paste. The Cera Wall Putty shall be applied on the prepared surface with the help of a blade or trowel to a maximum thickness of 2mm and shall be allowed to dry overnight. When a second coat is required, the same shall be applied after the first coat becomes dry. Cera Wall Putty shall be cured for 3 days by mist spraying.
The cured and dried surface shall be rubbed with fine emery paper to achieve smooth and even surface. The surface thus prepared is ready for application of Cera Décor or any other type of decorative paints.
Cera-Chem recommends the use of Cera Wall Primer as a prime coat before application of paint. This will ensure better finish and increased coverage of the coating.

Coverage:

Cera Wall Putty will have coverage of 1.5 m2 per kg for a thickness of 0.5mm.
The coverage can vary depending on the surface texture, method of application and wastage.

Shelf Life:

12 months under normal storing condition.

Health & Safety:

Avoid contact with skin for prolonged period. Any contact with eye, wash immediately with plenty of water and seek medical attention. Use rubber gloves while mixing as prolonged exposure to Cera Wall Putty may soften the skin and irritation may occur due to cement particles.

Yes! I am interested

20 Kg CERA Wall Putty

REQUEST CALLBACK

Click to Zoom

Ask Latest Price

Product Price: Get Latest Price

Product Details:

Brand	CERA
Usage/Application	Interior
Packaging Size	20 Kg
Finish	Gloss
Types	Acrylic Primer
Mixing Ratio	2/1

Having a rich industrial experience and expertise, we are engaged in offering an extensive range of Wall Primer to meet the needs of our clients. This primer is easy to apply and makes the wall look glossy after the paint. Excellent finishing is offered by this primer. Moreover due to its high quality it is highly demanded by our clients.

Features:
• Durable
• Weather resistant
• Long life

Yes! I am interested

X

Looking for Wall Putty ?

Explore more products

CERAPLAST 400 High Grade Super Plasticizer

Get Best Quote

CERA SCREED EP LV (Pourable) Epoxy Resin Grout

Get Best Quote

CERA BOND 28 Tile Adhesive

Get Best Quote

CERA Cote Epoxy Floor Coating

Get Best Quote

CERA Cote Polyurethane Floor Coating

Get Best Quote

CERA SEAL Expansion Joint Sealant

Get Best Quote