Call 08047630630 58% Response Rate

Send Email

Epoxy Coating

Manufacturer of a wide range of products which include cera cote epoxy floor coating and 6 kg cera polyurethane based coating.
CERA Cote Epoxy Floor Coating

CERA Cote Epoxy Floor Coating

Get Latest Price

Product Brochure

Product Details:
BrandCERA
Packaging Size1 Kg
FormLiquid
CoatingEpoxy
Cure timer2 to 4 Hours
Application Temperature10 Degree C - 40 Degree C
ColourGrey, Skyblue, Green, Yellow, Off-White, Red Etc.
Specific gravity1.2 gm/cc
CERA Cote Epoxy Floor Coating is a unique formulation, which produces hard chemical resistant, aesthetically pleasing colored floor paint.

Advantages:
  • Excellent adhesion
  • Abrasion resistant and smooth
  • Resistant to a wide range of chemicals
  • Hygienic
  • Improved aesthetics

Function:
  • Ceracote EP is a chemically cured epoxy floor paint system where the interwoven polymer films aid in better mechanical properties and chemical resistance.

Uses:
  • Ceracote EP floor paint forms a smooth and aesthetically pleasing film having excellent adhesion to the substrate and have good resistance to wide range of Minerals and Organic acids, Alkalis, Oils, Fats etc.
  • Ceracote EP can also be applied on vertical surfaces and ceilings of buildings to resist aggressive chemicals and to produce hygienic environment.
  • Ceracote EP can be applied as a colored paint for floors and walls in industrial buildings.
  • Ceracote EP can be used as a hygienic surface paint for food processing industries, swimming pools, operation theatres etc.
  • Ceracote EP serves as a protective paint on concrete and steel structures exposed to aggressive chemical environment, battery rooms, chemical handling areas etc.
  • Ceracote EP can be used as a decorative sealer paint on Cera
  • Screed EP surfaces.Ceracote EP serves as a protective paint on concrete and steel structures exposed to aggressive chemical environment, battery rooms, chemical handling areas etc.
  • Ceracote EP can be used as a decorative sealer paint on Cera
  • Screed EP surfaces.

Method Of Application:
  • Surface Preparation: The adhesion of Ceracote EP film is greatly impaired if the surface is not prepared thoroughly. Remove dirt, oil residues and existing paint if any by scrubbing with coarse wire brush or by chipping off the top layer. Grease and oil, if present should be cleaned by chemical means or by sand blasting and water jetting. New concrete should be cured for minimum 28 days prior to the application of Ceracote EP.
  • The concrete should be fully dry before application of Ceracote EP. To find the moisture content in concrete, a hygrometer reading shall be obtained. It is advisable to carry out the epoxy paint
  • Ceracote EP has excellent resistance to various chemicals such as 50% solution of Sulphuric Acid, Phosphoric Acid, Hydrochloric Acid, Sodium Hydroxide, 10% solution of Ammonia and Urea, Saturated sugar, Kerosene, Petrol and Diesel.

Application:
  • Prior to application of Ceracote EP, the cracks, joints etc., shall be sealed with epoxy sealant.
  • Cera Primer EP shall be applied on the prepared surface and allowed to dry. The base and curing agent of Ceracote EP shall be mixed in proportion and applied in 2 coats leaving sufficient time between each coat of application.
  • Tools and equipments should be cleaned with Cerasol immediately after application.
  • Curing: At 36 Degree C cure time is 2-4 hours and full curing takes 4 days.
Get Best QuoteRequest A Callback
6 Kg CERA Polyurethane Based Coating

6 Kg CERA Polyurethane Based Coating

Get Latest Price

Product Brochure

Product Details:
TypePU Powder
ColorBlue
Packaging Size6 Kg
TypesEpoxy
BrandCERA
CoatingEpoxy Protective Coating
6 Kg CERA Polyurethane Coating is a two-component solvent free, high performance polyurethane protective coating possessing good resistance to long-term exposure of UV rays and atmospheric chemical attacks.

Advantages:
  • Low maintenance costs
  • Excellent resistance to most industrial, atmospheric chemicals attacks
  • Excellent resistance to water ingress, UV rays, no yellowing on exposure to sunlight
  • High Anti Carbonization properties
  • Seamless surface, easily cleanable
  • 100% impermeable surface finish

Function:
  • Cera Cote PU is a two-component, solvent-free, pigmented & clear high performance Polyol with Isocynate polyurethane protective coating possessing good resistance to long term exposure of UV rays and chemical attacks.

Uses:
  • Cera Cote PU provides a chemical and UV resistant protective coating, also suitable for external waterproofing.
  • Cera Cote PU can be applied on various substrates such as concrete, masonry, steel, etc.

Application Instructions:

  • Surface preparation: All surfaces must be smooth, sound and free from loose or flaking material and areas of standing water. Surfaces must be free from contamination such as oil, grease, dust, loose particles and organic growth. Concrete surfaces must be fully cured, laitence free and no traces of shuttering release oils and curing compounds. All surfaces should then be air blasted to remove all foreign matter and open up blow-holes, and free to provide coating for Cera Cote PU. All blow holes and imperfections should be filled with Cera Polymortar PE.
  • Mixing: The individual components of A & B should be thoroughly stirred before mixing them together and then the components A&B should then be mechanically mixed together for atleast 3 minutes using a slow speed (200 -250 RPM) drill machine attached with a mixing paddle.

Application:
  • Prior to application of Cera Cote PU, Cera Primer PU shall be applied on the prepared surface and allowed to dry. Apply Cera Cote PU with a nylon brush, or a flat pile felt roller, to the prepared substrate. Allow Cera Cote PU first coat to dry for 2-4 hours at 30oC and then apply the second coat. When applying Cera Cote PU as a topcoat over any of the Ceracote range of epoxy systems or equivalent range of epoxies, it must be applied after 6 hours but within 24 hours of applying the epoxy.

Curing:
  • This coating will become tack free in approximately 4 - 6 hours and be fully cured in 7 days.

Coverage:
  • Cera Cote PU will cover 40-45 sq.ft/coat/kg/DFT @ 180-200 microns. However coverage may vary depending on the porosity of substrate, application thickness, wastages etc.

Cleaning:
  • Clean tools and equipment immediately after use with Cera Diluent. Wash immediately hands and skin with soap or a body wash.

Storage:
  • Cera Cote PU has a shelf life of 6 months when stored under normal warehouse conditions in unopened containers. Exposure to moisture greatly reduces the shelf life, particularly that of the hardener.

Safety Measures:
  • Cera Cote PU should not come in contact with skin or eyes nor should they be swallowed. Avoid inhalation of vapors and ensure adequate ventilation. Wear suitable protective clothing, gloves and eye/face protection. Should accidental skin contact occur, remove immediately with a resin removing cream followed by washing with soap and water does not use solvent.
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Cera- Chem Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.