Call 08047630630 58% Response Rate

Send Email

CERA Fil 45 Tile Joint Grout

Prominent & Leading Manufacturer from Chennai, we offer cerafil 45 polymer based un-sanded cementitious tile joints grout ,interior,1 kg/mrp.
CERAFIL 45 Polymer Based Un-sanded Cementitious Tile Joints Grout ,Interior,1 Kg/MRP
  • CERAFIL 45 Polymer Based Un-sanded Cementitious Tile Joints Grout ,Interior,1 Kg/MRP
  • CERAFIL 45 Polymer Based Un-sanded Cementitious Tile Joints Grout ,Interior,1 Kg/MRP

CERAFIL 45 Polymer Based Un-sanded Cementitious Tile Joints Grout ,Interior,1 Kg/MRP

Product Price: Rs 150 / KgGet Best Price

Product Brochure

Product Details:
Packaging TypeBag
Usage/ApplicationTile and Marble Joint
Packaging SizeCemetious and interior wall
Density1.12 gm/cc
PackagingUpto 10 kg
Tile joint width recommended1 to 6 mm
CERA Fil 45 Tile Joint Grout is superior grade polymer modified cementitious tile joint grout processing excellent hydrophobic property resulting in low dirt pickup and clean joints.

  • It is non-shrinkable and will not crack.
  • It is anti-fungus and water repellant
  • It is tough and has high abrasion resistance
  • It has high bond strength
  • Low dirt accumulation and provides clean joints
  • It has built in flexibility to withstand forces created by expansion and contraction of concrete beneath the tile.
  • Available in all tile colors and ades.

  • CERAFIL 45 is a cementitious water repellant tile grout used for interior and exterior application.

  • CERAFIL - 45 is ideally recommended on tile joints of width ranging from 1 to 10 mm for internal application.
  • CERAFIL - 45 is suitable for grouting ceramic tiles, vitrified tiles, granites, marbles, mosaics and natural stone in walls and floors.
  • For wider joints from 5mm to 10mm it is advisable to use 400gms of Cera Tile Admix with 1kg of CERAFIL-45

Method Of Application:
  • Surface Preparation: To obtain good adhesion, it is essential to have a clean and sound substrate. All laitance, oil, grease, etc, shall be cleaned by chemical etching using Cera ALKlean
  • Mixing and application: Mix 2 to 3 parts CERAFIL - 45 to one part of water by volume to form thick paste consistency. Do not add more water to the mix. For larger application, it is advisable to mix the contents using a portable mechanical mixer. Keep the wet mortar idle for 5-10 minutes and remix before application for optimized polymer and uniform color
  • Fill the tile joint with CERAFIL 45– diagonally across the tile surfaces using a rubber grouting trowel or any other tool. Remove surplus grout with a wet cloth.
  • Polish the tiles with dry cloth when the job is over.

  • Full curing takes around 5-6 days and it is absolutely essential that grouted joints should be properly water cured.

Pot Life:
  • The working time of CERAFIL - 45 depends upon the temperature. Pot life is about 60 minutes.

Shelf Life:
  • 12 months in sealed container if stored in dry conditions.

Health & Safety:
  • Avoid contact with skin for prolonged period. In case of any contact with eyes, wash immediately with plenty of water and seek medical attention.
Get Best QuoteRequest A Callback


Contact Us
Thank youYour Enquiry has been sent successfully.
© Cera- Chem Private Limited. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.